AASTRA 6737i User Guide EN - Manual (Page 195)

Available Features Enabled by Administrators
41-001452-00 Rev 01 – 06.2013
188
The following table identifies when a call terminated screen displays on the phone for different scenarios.
The following procedure describes how to handle the disconnected screens on your phone.
IF THEN
1 line active and far-end disconnects, the line in focus:
displays disconnected screen.
plays busy tone.
displays "Call Terminated" message on the screen.
the line not in focus:
plays busy tone.
2 or more lines active, and far-end disconnects, the line in focus:
displays disconnected screen.
plays busy tone.
displays "Call Terminated" message on the screen for 5 seconds.
When 5 second times out:
the busy tone stops
the disconnected screen disappears.
2 or more lines active, and a line NOT in focus is disconnected
by the far-end, no busy tone plays
no disconnected screen displays
no “Call Terminated” message displays
An incoming call comes in on the line in focus that has a discon-
nected screen displaying, the line in focus with no calls on hold:
displays a ringing screen
the line in focus WITH calls on hold:
flashes its’ Line LED
An incoming call comes in on another line (NOT in focus), and
the disconnected screen is displaying on the line in focus, the disconnected screen no longer displays on the line in focus.
A phone application is NOT in focus, busy tone plays
no disconnected screen displays
When the phone application in focus on screen stops:
busy tone plays
disconnected screen displays
Note:
This “indication of terminated calls” feature does not affect parked calls on the phone or the conference call feature.
IP Phone UI
1. Press the Goodbye key.
The busy tone stops and the disconnected screen no longer displays.
or
Select any Line key.
The busy tone stops and the disconnected screen no longer displays.
A dial screen displays.