AASTRA DT4x3 for MX-ONE User Guide EN - Manual (Page 52)

1424-EN/LZT 103 089 Uen D 2010-02-12 52
D URING C ALLS
Note: If Conference does not appear when you press More, you
can also do the following to establish a conference: Press R, dial
the number to include, and press 3.
4. Repeat the procedure to add more conference members.
9.10 Dialing During a Connected Call
When calling interactive teleservices, such as phone banks, you need to
use Dual Tone Multi Frequency (DTMF) signals. If the phone exchange
is not already programmed to automatically convert entered digits into
DTMF signals, this function needs to be activated during the call.
To dial digits during a connected call, do the following:
1. Press More, select DTMF and press Select.
Note: If DTMF does not appear when you press More, you can
press *.
2. Dial the required digits.
The entered digits are transferred as DTMF signals.
Note: When you interact with the voice mail system, or if the automated
attendant is integrated in the exchange, DTMF dialing is auto-
matic.
9.11 Conversation Recording Service
If Integrated Voice Mail is configured in the telephony system, and you
have a mailbox, the conversation recording service allows you to record
your telephone conversations and listen to them from your mailbox. The
recorded conversation is treated as a normal voice message in your
mailbox.
Note: Recording a conversation without the caller's prior consent may
be illegal, as may be sending the recording to a third party. The
initiator has to request the caller's consent prior to beginning the
recording, at the conclusion of the recording, and for any subse-
quent use of the recording. Compliance with the law is the exclu-
sive responsibility of the user; any violation may be subject to
legal action. Neither the manufacturer nor the distributor may be
held responsible for any abusive use of this function by the user,
or by any other damage that may result.