1 ordering diversion of incoming calls, Press menu, select and press select, Step to call services, and press select – AASTRA DT4x3 for MX-ONE User Guide EN User Manual
Page 57: Select divert calls and press select, Select activate and press select, Press to finish the procedure, 2 canceling diversion, Select deactivate, 2 variable call forwarding
C
ORDLESS
P
HONE
FOR
MD E
VOLUTION
57
1424-EN/LZT 103 089 Uen D 2010-02-12
Note: This feature needs to be programmed in the WinPDM or CPDM.
Please contact the system administrator.
10.1.1
Ordering Diversion of Incoming Calls
To divert incoming calls to another phone number, do the following:
1.
Press Menu, select
and press Select.
2.
Step to Call services, and press Select.
3.
Select Divert calls and press Select.
4.
Select Internal, External, No reply or When busy, and press
Select.
5.
Select Activate and press Select.
6.
Dial the number (maximum 24 digits) to divert your calls to and
press OK. You can also press
to select a number from the
call list.
Wait for the call timer to start in the display.
7.
Press
to finish the procedure.
10.1.2 Canceling
Diversion
To stop diversion, do the following:
1.
Press Menu, select
and press Select.
2.
Step to Call services, and press Select.
3.
Select Divert calls and press Select.
4.
Select Internal, External, No reply or When busy, and press
Select.
5.
Select Deactivate.
Wait for the call timer to start in the display.
6.
Press
to finish the procedure.
10.2 Variable
Call
Forwarding
The definition of a variable call forwarding on a case-by-case basis is
carried out within the framework of your extension's service program-
ming functions.