AASTRA DT4x3 for MX-ONE User Guide EN - Manual (Page 58)

1424-EN/LZT 103 089 Uen D 2010-02-12 58
C ALL F ORWARDING
10.2.1 Call Forwarding Immediately, At No Answer or When
Busy
To order variable call forwarding immediately, at no answer, or when
busy, when your extension is idle, do the following:
1. Press the prefix for the desired call forwarding feature. Press
– 61 for immediate call forwarding
– 62 for call forwarding at no answer
– 63 for call forwarding when busy
– 69 for call forwarding at no answer or when busy
2. Dial the extension number or external phone number that incoming
calls will be forwarded to.
The number can contain up to 18 digits including the network
access prefix. An external number may be one that is accessible
through abbreviated dialing.
Note: An external number is composed of the external access 0
prefix followed by the actual external directory number and #.
3. Press to confirm.
Wait for the service acceptance tone.
4. Press to finish the procedure.
The selected call forwarding feature is activated immediately and
your extension returns to idle status.
Note: In case you have forgotten to define your variable call forward
before leaving your extension, you may ask the attendants to
define it for your account. This refers to the third party call forward
service that is reserved specifically for them.
10.2.2 Do Not Disturb Call Forwarding
To order call forwarding when you do not wish to be disturbed, do the
following:
1. Press 64 and .
Wait for the service acceptance tone.
2. Press to finish the procedure.
The selected call forwarding feature is activated immediately and
your extension returns to idle status.