VEGA INSYS Modem GPRS 5.0 - Manual (Page 14)

Mounting INSYS GPRS 5.0 serial
14
4.4 HSComm GPRS
The configuration of the INSYS GPRS 5.0 serial takes place via AT commands which
are entered by a terminal program or a control program in the form of character
sequences. For a simpler set-up, all basic functions of the INSYS GPRS 5.0 serial can
be entered without knowing the individual AT commands and their parameters,
using the configuration software HSComm GPRS.
The software can be installed on the operating systems Microsoft Windows 2000
and Microsoft Windows XP. A terminal window to enter commands directly is
available.
In Chapter 5 - Connections - and Chapter 6 - Functions -, the HSComm GPRS or an-
other terminal program can be used for the configuration. The AT commands can
be directly entered into the HSComm GPRS at the menu item “Terminal”.
The HSComm GPRS checks the connected device during startup. By default, only
those settings can be selected which are implemented in the identified device.
The buttons in the right column can be used to select the current settings, to re-
start (reset) the device, or to set the factory settings (default).
The current can be saved as a file at the menu item "File" in the main menu at the
top window border, and reloaded at a later date.
The selected configuration of the parameters is only sent to the INSYS GPRS
5.0 serial after you click on the button Send values.
4.5 Initial Operation