VEGA INSYS Modem GPRS 5.0 - Manual (Page 64)

Functions INSYS GPRS 5.0 serial
64
6.5 Automatic SMS Processing
Note: The sending time of an SMS from the sender to a re-
cipient depends on the pertinent provider of the
service number. Due to the network load and the
time of day, the time required for sending an SMS
may change.
The automatic processing of SMS messages can be set using the
HSComm. Click on the tab “Basic Settings”.
6.5.1 Activation
Activation in HSComm is done by clicking the automatic SMS
processing.
Each incoming SMS is deleted after it has been processed. Each
SMS with an INSYS AT command is processed. Any other SMS is
immediately deleted.
If other SMS messages are required for processing with the appli-
cation, the field “Leave remote SMS in SIM buffer” must also be
clicked.
The “remote SMS messages” must be read out regularly.