VEGA INSYS Modem GPRS 5.0 - Manual (Page 25)

INSYS GPRS 5.0 serial Mounting
25
10. Test the serial connection to the INSYS GPRS 5.0 serial by entering the
AT command "at" in the terminal window and confirming the entry with
the "Enter" key.
If you don't see the characters at the terminal that you are en-
tering, you most probably selected the wrong baud rate. Repeat
step 6 and 7 to check and correct the connection paramaters.
The INSYS GPRS 5.0 serial will respond with "OK".
11. Prepare the following commands in a text editor such as "Notepad".
GET /1kb.txt HTTP/1.1
Host: www.insys-tec.de
Please consider case sensitivity.
Complete the entry of each line in the editor by pressing the En-
ter key one time.