VEGA INSYS Modem GPRS 5.0 - Manual (Page 33)

INSYS GPRS 5.0 serial Connection
33
Mark and then apply the selection.
Alternatively, the settings can be entered or modified using the terminal pro-
gram.
Enter PIN AT**PIN
If manual network provider selection is
required, the network provider identifi-
cation number must be determined. You
will find a chart for the INSYS GPRS 5.0
serial with identification numbers and
names in the AT command overview –
available at no charge from INSYS. In
our example, the German network T-
Mobile with the identification number
26201 is used.
Network provider selection for T-Mobile
in Germany AT**PROVIDER=2,1,26201
Perform a RESET to use the PIN. AT**RESET
Manual registration after each reset
If the module is started and logged in from an external application, this applica-
tion may request a manual login. In this case, the following method should be
used:
Enter the PIN (when the PIN is entered via
this command, it must be re-entered for
each reset).
AT+CPIN=<PIN>
Prompt manual registering (this command
may trigger a waiting period of several sec-
onds)
AT+COPS=0