VEGA INSYS Modem GPRS 5.0 - Manual (Page 58)

Functions INSYS GPRS 5.0 serial
58
In a second step, the IP target for the callback must be entered.
Afterwards, on the tab "Basic settings"
the automatic call acceptance after 2 ring tones is required.
Alternatively, our example can be set using the terminal program:
In general, activate selective call acceptance
Enter allowed phone number 1
Enter allowed phone number 2
AT**CLIP=1
AT**CLIP1=
+494989949494.
AT**CLIP2=
+491711253456
Store destination IP for callback
Store destination TCP port for callback AT**AUTOIP=
200.12.0.120
AT**AUTOPORTIP=
10000
Store callback settings AT**CALLBACK=
0,2,0
No callback action for call from phone num-
ber 1
IP callback for call from phone number 2
No callback action for call from phone num-
ber 3