VEGA INSYS Modem GPRS 5.0 - Manual (Page 8)

Function Overview INSYS GPRS 5.0 serial
8
2 Function Overview
The INSYS GPRS 5.0 serial is a DIN rail device for industrial applications.
It has a compact design, a robust plastic housing and offers the following charac-
teristics:
Quadband GSM engine for all four frequency ranges: 850 / 900 / 1800 / 1900
MHz (The INSYS GPRS 5.0 serial can be used worldwide)
Before using the INSYS GPRS 5.0 serial you should check the certifica-
tion requirements in the country of deployment, see Chapter 14.
Integrated TCP/IP and PPP stack for transparent modem emulation via GRPS
(GRPS modem emulation)
GSM services: GSM/CSD data connection, SMS, GPRS connection
Support for the virtual COM port driver VCOM from INSYS MICROELECTRONICS
GmbH
Integrated TCP/UP stack for modem-compatible behavior with transparent
transfer of data from and to the serial interface (“TCP transparent”).
• Active dialing of IP addresses or domain names with TCP connections to a
server
• Accepts TCP connections ("TCP Listen")
Dedicated line function (leased line); design as CSD or TCP/IP possible; intelli-
gent re-dialing time-outs for TCP/IP cost cutting; configurable substitute ac-
cess for redundant paths.
Callback function for incoming calls; callback as CSD or “TCP transparent" pos-
sible
Defined termination of GPRS connections for incoming CSD calls ("CSDPRIO")
Access protection via phone number analysis (CLIP) for incoming CSD calls, in-
coming SMS, when starting a callback, and when the priority for CSD calls is
set.
Password protection for remote configuration and configuration via SMS
Storage of the SIM card PIN enables automatic login into the GSM network af-
ter reset/restart
Timer-controlled logout and login into the GSM network or restart of the de-
vice, to prevent undefined login states in the GSM network
Automatic dispatch of a predefined SMS when the switch input is activated.
Advance switch input functionality: Connection setup and "IO tunneling"
(transmitting the input states via a TCP connection)
Standard AT command set according to GSM 07.05 and GSM 07.07
Extended AT command set (INSYS AT command for additional functions)