VEGA INSYS Modem GPRS 5.0 - Manual (Page 61)

INSYS GPRS 5.0 serial Functions
61
Save settings AT**SAVE
Perform RESET, accept all parameters AT**RESET
6.3.2 CSD priority without caller authentification
This function makes it possible that each caller can terminate the existing data connec-
tion. In this case, the phone numbers must not be entered. Phone numbers that were
entered anyhow, will not be rated.
Alternatively, the function can be set using the terminal program:
In general, activate selective call acceptance
(To activate the call signals or enable them to
be processed by the INSYS GPRS 5.0 serial,
this setting must be entered.)
AT**CLIP=1
Activate CSDPRIO without phone number au-
thentification AT**CSDPRIO=2
Save settings AT**SAVE
Perform RESET, accept all parameters AT**RESET
Note
Regardless of the authentification settings, a callback number can
be stored.
6.4 Automatic Logout and Login or Restart of the Device
Scheduled logout/login or a device restart can be activated using
the HSComm. Click on the tab “Basic Settings”.