VEGA INSYS Modem GPRS 5.0 - Manual (Page 75)

INSYS GPRS 5.0 serial Functions
75
Alternatively, this function can be set using the terminal program:
Configuration of the first device:
Enter the output device as AutoDial address:
Activate the leased line operation to the IP address of
the other device
Define the transmission port:
Activate the change transmission for input 1:
Activate the change transmission for input 2:
Set the transmission behavior:
-for the transmission when the level is changed:
-for the transmission after a certain time (in minutes):
Values for <n>: 1-255 (minutes)
The option AT**INPUTTIMEOUT Option can be used si-
multaneously with AT**INPUTCHANGE.
AT**INPUTTIMEOUT prevents the provider from termi-
nating the unused, open connection.
Save the settings.
Reset the device.
AT**LL=2
AT**AUTOIP=100.1
20.32.5
AT**AUTOIOPPORT=
1234
AT**INPUT1=8
AT**INPUT2=8
AT**INPUTCHANGE=
1
AT**INPUTTIMEOUT
=<n>
AT**SAVE
AT**RESET
Configuration of the second device:
Activate TCP Listen:
Set the port to accept the connection
Activate the automatic connection acceptance after 2
"rings",
Activate the change transmission for input 1:
Activate the change transmission for input 2:
Set the transmission behavior:
-for the transmission when the level is changed:
AT**TCPLISTEN=1
AT**TCPLISTENPOR
T=1234
ATS0=2
AT**INPUT1=8
AT**INPUT2=8
AT**INPUTCHANGE=
1