VEGA INSYS Modem GPRS 5.0 - Manual (Page 19)

INSYS GPRS 5.0 serial Mounting
19
3. Insert the SIM card into the card holder.
4. Reinsert the SIM card holder into the SIM card reader.
Insert the card holder. The contacts of the SIM card must point
to the left when looking at it from the front of the device.
5. Switch the power supply on.
The device will boot, the power LED will light up continuously, and the
status LED will blink.
6. Wait until the boot process is completed.
The Status LED goes out which indicates that the boot process is com-
pleted.
The signal LED is blinking.
4.5.5 Checking the settings
1. Read out the settings.
Click on the button "Read settings" in the software HSComm
GPRS.
A symbol next the entry field of the PIN will show, if the INSYS GPRS 5.0
serial has been registered.