VEGA Phoenix PSI Data Fax Modem User Manual
Page 62
PSI-DATA/FAX-MODEM/RS232
4-16
692302
•
Specify the modem mode:
–
In "Set" mode the modem responds to a positive edge on the local input by
calling the partner and setting the partner output. This output can be reset by
an AT command (local or remote), an SMS, the integrated pushbutton or by
briefly disconnecting the supply voltage.
–
In "Follow" mode the modem responds to a positive edge on the local input by
calling the partner and setting the partner output. This output can be reset by a
falling edge on the same input and by calling the partner again.
•
Click on the "Write" button
to write the settings to the modem.
Line Test
The "Line Test" function can be used to check that the telecommunications cable is
connected correctly.
•
Click on the "Line Test" button
to start the line test.
The result of the line test is displayed on-screen.
The telecommunications cable is connected
correctly.
Please check the telecommunications cable (see
Section "Telecommunications Cable" on page 3-12).