Sweep wheel installation (cont.) – Grain Systems Unload Augers PNEG-1521 User Manual
Page 33
Advertising
INSTALLATION
33
PNEG-1521 Commercial Direct Gear Drive Bin Sweep Auger
12. SWEEP WHEEL INSTALLATION
(Cont.)
C. Attach the Input Shaft of the Gear Driven
Reduction Drive to the final Sweep Flight using
two (2) 5/8" x 4" Grade 8 bolts and Stover nuts.
Attach the Mounting Bracket to the Final Back
Shield with two (2) 3/8” x 1-1/2” Grade 8 bolts,
two (2) flat washers and two (2) Nylock nuts.
FIG.12-C
5/8" x 4" Grade 8
Hex Bolt
5/8" Stover Nut
3/8" Flat Washer
3/8" Nylock Nut
3/8" Flat Washer
3/8" x 1-1/2" Hex Bolt
Advertising