Ga) with a base insert (2–14 ga), Ener (2–5 ga) with a base insert (2–14 ga), Chapter 6: stiffeners – Grain Systems Tanks PNEG-4060 User Manual
Page 66
Close-Punch Laminated Stiffener (2 Ga) with an Insert (10–14 Ga) to
a Laminated Base Stiffener (2–5 Ga) with a Base Insert (2–14 Ga)
Reference the following information for a close-punch connection of a two-ring stiffener (CTS-2079XX and
CTS-2081XX) to a laminated base stiffener and insert (CTS-2114XX and CTS-2113XX).
Figure 6-21 Close-Punch Laminated Stiffener with an Insert to a Laminated Base Stiffener with a Base Insert
A
Close-punch laminated stiffener (CTS-2079XX)
B
Close-punch insert (CTS-2081XX)
C
Close-punch laminated base stiffener (CTS-
2114XX)
D
Close-punch base insert (CTS-2113XX)
E
3/8 x 1 Bolt (S-7485)
F
3/8 Nut (S-9426)
G
Completed assembly
NOTE: Two-post stiffeners shown. The bolt pattern will
vary for three-post. Only place bolts where holes
in the stiffeners align with holes in the sidewall
sheet.
66
Pneg-4060 60 Ft Diameter 40-Series Bin