Base boot, To a base boot, Chapter 6: stiffeners – Grain Systems Tanks PNEG-4060 User Manual

Page 72

Advertising
background image

Chapter 6: Stiffeners

Close-Punch 12–Bolt Pattern Laminated Stiffener to Laminated
Base Stiffener with an Inserts to a Base Boot

Reference the following information for a close-punch connection of a 12–bolt pattern laminated stiffener
(CTS-2137) to a laminated base stiffener (CTS-2133XX) with a inserts (CTS-2138XX and CTS-2134XX) to
a base boot (CTS-2109XX or CTS-2110XX).

Figure 6-29 Laminated Stiffener to Laminated Base Stiffener with an Inserts to a Base Boot

A

Close-punch laminated stiffener (CTS-2137)

E

Base boot (CTS-2109XX or 2110XX)

B

Close-punch base Insert (CTS-2138XX)

F

3/8 x 1 Bolt (S-7485)

C

Close-punch laminated base stiffener (CTS-
2133XX)

G

3/8 Nut (S-9426)

D

Close-punch base Insert (CTS-2134XX)

H

Completed assembly

NOTE: Two-post stiffeners shown. The bolt pattern will vary for three-post. Only place bolts where holes in

the stiffeners align with holes in the sidewall sheet.

72

Pneg-4060 60 Ft Diameter 40-Series Bin

Advertising