Grain Systems PNEG-526 - Manual (Page 146)

Table A-12. Oil Fill
( )with pump
Table Allowable 011 Table Oil Change
Forced Lubrication For Vertical Units
Table Plunger Pump Type Plunger Pump Lubrication
The plunger pump (Fig. A-2, Part is automatically
operated by a cam (Fig. A-2, Part fitted on the slow
speed shaft (Fig. A-2, #I-01). The number of pumping
cam teeth required is in direct relation to the reduction ratio
and frame size. Please consult the for input speeds
other than standard.
Table Positive Displacement (Trochotd) Pump Type
Positive Displacement Pump Lubrication
Forced oil lubrication is accomplished by using a positive motor be interlocked with the pump motor to avoid operation
and motor that reauires an additional without lubrication. The must be started 30 seconds
electric It is recommended that the main or longer before the main motor is operated.
Please consu t the for when mounted any other or angle
the factory when an Inverter
A valve, pressure set at 42.7 (3 a standara on pump