Xylem BMAID R4 - Manual (Page 21)

PAGE 21
Residential Water Systems
CentriPro
CENtrIpro quICk DISCoNNECt wIth qD pumptEC
CoNNECtIoNS:
1. Remove the cover from the front of the 3-wire CentriPro control box.
2. Remove the yellow wire from the terminal strip at L2.
3. Remove the black wire connecting L1 and the capacitor from L1.
4. Press the QD Pumptec onto the L1 and L2 terminals.
5. Reconnect the yellow wire to L2 on the QD Pumptec.
6. Connect the black wire from the capacitor to L1 on the QD Pumptec.
ORANGE
BLACK
BLK VOLTAGE
RELAY
1
2
5
YEL
YEL
RED
B(MAIN) Y(COMM) R(START) L2 L1
QD
PUMPTEC
L1
L2
CENTRIPRO CONTROL BOX WITH PUMPTEC INSTALLED