Xylem IM098 AQUAVAR Model 56 Controller - Manual (Page 11)

Gasket
4 screw
M5x50
Center bit
4 mounting
clamps
Connection
motor
conduit box
Thermistor
Transducer
Installation Procedures
6
Step 2 – Mounting the AQUAVAR Model 56 Controller
(AV 1.15, AV 2.2 style)
continued
155
70
Cable entries
Closing cap
Type Weight (kg)
AV 1.15 4.70
AV 1.2 4.70
2) Mounting:
• Remove the 3 screws from the AQUAVAR
cover.
• Place the center bit in the AQUAVAR heat
sink.
• Place the AQUAVAR on the motor.
• Hang the 4 clamps by the motor fan cover
and mount with the 4 screws to the
AQUAVAR.
• Replace the AQUAVAR cover with the
3 screws.
Don't forget the gaskets for the 3 screws.
Ensure that there is no water on the unit
before you open the cover.