Xylem IM098 AQUAVAR Model 56 Controller - Manual (Page 8)

! Safety Instructions
WARNING
Hazardous voltage
can shock, burn or
cause death.
3
Safety Instructions
3. Installation and maintenance MUST be performed by properly trained and qualified personnel.
4. Review all instructions and warnings prior to performing any work on the AQUAVAR Model 56 Controller.
5. Any safety decals MUST be left on the AQUAVAR Model 56 Controller unit and pump.
Note
Inspect AQUAVAR Model 56 Controller for any damage after unpacking from shipping crates. Report
any damage immediately to the carrier or distributor/dealer immediately.
6. In addition to instructions contained in this manual, you must meet any local safety, electrical, or plumbing
codes and requirements. Installation, maintenance, or repair work must only be carried out by trained,
skilled, and qualified personnel.
7. The AQUAVAR Model 56 Controller drive head must be disconnected from the main power supply
before attempting any operation in the electrical or mechanical part of the system.
Note
When in operation, the motor can be stopped, but power remains at the drive head. The motor
and pump could start unexpectedly and produce serious injury. When the AQUAVAR Model 56
Controller drive head is connected to the main power supply, the inverter power supply and master
control unit are also connected to the power supply.
WARNING!
FAILURE TO DISCONNECT ELECTRICAL POWER BEFORE ATTEMPTING ANY MAINTENANCE
CAN CAUSE SHOCK, BURNS, OR DEATH.