Xylem IM098 AQUAVAR Model 56 Controller - Manual (Page 3)

Program Record (continued)
Parameter Range (Default) User Setting
Submenu Multicontrol N/A Read-Only
Actual Value Increase 0-100% (6%)
Actual Value Decrease 0-100% (4%)
Enable Sequence Control 6-60 Hz (60 Hz)
Switch Interval 0-250 (12 Hrs)
Submenu Slave Pump
Slave Pump Configuration
Simple Multi Control,
Run Signaling or Error Signaling
Slave On 0-60 Hz (58 Hz)
Slave Off 0-60 Hz (0 Hz)
Submenu Sensor Read-Only
Sensor ZeroAdjust Press (INC) + (DEC)
Sensor Adjust Maximum 0.5-4.5 V
Submenu Test Run Read-Only
Test Run Start Press (INC) + (DEC)
Test Time 10-100 hrs (0 hrs)
Test Frequency 0-60 Hz (30 Hz)
Test Run Boost 0-25% (5%)
Submenu Error Read-Only
Conveyor Limit 0-100% (0%)
Error Delay 0-100 Secs (0 Secs)
Set Password 0-9999 (66)
Default Settings
AQUAVAR Model 56 Controller Owner’s Information Record