Vi. slave pump operation (flowchart #6), Programming – Xylem IM098 AQUAVAR Model 56 Controller User Manual
Page 28
Advertising
VI. Slave Pump Operation (Flowchart #6)
1) From the Parameter screen on the main menu
press the arrow and the display changes to:
2) Press the arrow until you reach the number
0066.
3) Press the ➔ repeatedly until you reach:
4) Press the arrow and you will reach:
5) Press the ➔ and you will see:
• This is the frequency the slave pump will turn
on and run at maximum speed. Adjust with
and until you reach the desired setting.
Generally this is at 60 Hz.
6) Press the ➔ arrow until you reach:
• This is the frequency the slave pump will turn
off. Adjust with and until you reach the
desired setting. Generally this is at 40 Hz.
Programming
23
PASSWORD
0000
PASSWORD
0066
SUBMENU
RELAY
RELAY
CONFIGURATION
➔
➔
➔
➔
➔
➔
➔
SLAVE ON
LIMIT
SLAVE OFF
LIMIT
Advertising