Xylem IM098 AQUAVAR Model 56 Controller - Manual (Page 23)

Entering Compensation Values
Instructions
1) From the Parameter screen on the main menu
press the arrow and the display changes to:
2) Press the arrow until you reach the number
0066.
3) Press the ➔ arrow repeatedly until you reach:
4) Press the arrow once and you will reach:
5) Press the ➔ arrow several times until you
reach:
6) Now press the arrow until you reach the
desired “Lift Frequency”. This is the frequency
at which the pump works at the set pressure
and a flow of 0 GPM. On a 60 Hz system, there
is virtually no flow below 40 Hz.
7) Use the ➔ arrow to move to the screen:
8) Now press the arrow until you reach the
desired “Lift Intensity”. This value states how
much the set value should be continually
increased until the maximum speed is reached.
Returning to normal operation:
9) Hold the ➔ arrow down for 3 seconds and
you will be returned to:
10) Hold the ➔ arrow down again and you will be
returned to the main menu.
Programming
18
PASSWORD
0000
PASSWORD
0066
SUBMENU
CONTROLLER
WINDOW
0.0%
LIFT FREQUENCY
6 Hz
LIFT FREQUENCY
40 Hz
LIFT INTENSITY
0%
PRESSURE 00 PSI
SPEED 00HZ
LIFT INTENSITY
3%
SUBMENU
CONTROLLER
➔
➔
➔
➔
➔