Xylem IM182 Balanced Flow - Manual (Page 2)

2
Owner’s Information
Controller Model Number:
Controller Serial Number:
Pump Model Number:
Pump Serial Number:
Motor Model Number:
Motor SFA:
Tank Serial Number:
Dealer:
Dealer Telephone Number:
Installation Date:
Wire Lengths (Feet)
Service Entrance to Controller:
Controller to Well:
Top of Well to Motor:
Incoming Voltage:
Owner’s Information Table of Contents
SUBJECT PAGE
1. Safety Instructions ..................................................... 3
Typical Installation ..................................................... 3
Ratings ...................................................................... 4
Required Materials .................................................... 4
2. Installation ................................................................ 4
Controller .................................................................. 4
Pump and Piping ........................................................ 4
Splicing Drop Cable to Motor Leads .......................... 4
Wiring Pressure Transducer ........................................ 5
Motor Wires .............................................................. 5
Input Power ............................................................... 5
User Interface Board .................................................. 8
3. Installer Pre-Start Selections ...................................... 6
Maximum Frequency (Speed) Switch ......................... 6
Dry Well Sensitivity ................................................... 6
Broken Pipe Protection .............................................. 6
Pressure Drop ............................................................ 6
Motor Overload Setting Dial ..................................... 6
Pressure Adjustment Pushbuttons ............................... 6
Controller Status Indicator ........................................ 6
Purging System .......................................................... 6
Checking Rotation ..................................................... 6
Checking for Leaks .................................................... 7
Switch Input .............................................................. 7
Table 4: Wire Sizing ................................................... 9
4. Troubleshooting ................................................. 10-12
Limited Warranty ........................................................ 12
Table of Contents
PLEASE USE THIS CONTROLLER INSTALLATION, OPERATION AND TROUBLESHOOTING
MANUAL (IOM) IN CONJUNCTION WITH THE PUMP IOM. THE CONTROLLER IOM COVERS THE
CONTROLLER ELECTRICAL INSTALLATION AND ANY SPECIAL INSTALLATION PROCEDURES
REQUIRED WITH VARIABLE SPEED CONTROLLERS.
ITT WILL NOT BE RESPONSIBLE FOR ANY DAMAGES TO AN INSTALLATION WHERE THE PRESSURE
RELIEF VALVE IS ALLOWED TO DISCHARGE INTO A FINISHED LIVING SPACE OR TO OTHERWISE
DAMAGE A CUSTOMERS PROPERTY. PLUMBING SAFETY DEVICES SUCH AS PRESSURE RELIEF
VALVES TO AN APPROPRIATE DRAIN IS THE RESPONSIBILITY OF THE INSTALLER AND IS OUT OF
OUR CONTROL.
Water Ends and CentriPro Motors include these extra data labels. Please attach them to the inside cover of the
Balanced Flow Controller for future pump and motor identification.
NOTICE: RECORD THE MODEL NUMBERS
AND SERIAL NUMBERS FROM THE
PUMP AND CONTROLLER IN THIS
INSTRUCTION MANUAL FOR FUTURE
REFERENCE. GIVE IT TO THE OWNER
OR AFFIX IT TO THE CONTROLLER
WHEN FINISHED WITH THE
INSTALLATION.
Submersible Pump
33GS15
www.goulds.com
CentriPro
®
Motor: M30432/300C313
3.00 HP
FLA: 9.2
SFA: 10.1 LRA: 59
SF: 1.15 Hz: 60
Volts: 230 PH: 3