Xylem Aquontroller - Manual (Page 43)

en en en en
43
5 5 5 5 PROGRAMMING PROGRAMMING PROGRAMMING PROGRAMMING
AQUONTROLLER has three menus:
Key functions
KEYS PRESSED EFFECT
+ Increase
+ Fast increase
+ ENTER Very fast increase
- Decrease
- Fast decrease
- ENTER Very fast decrease
ENTER Save (only if password has been entered)
Show next parameter
ENTER Show previous parameter
+ (3 seconds long Go to maintenance menu (from main menu)
+ - ENTER (all at once) Go to extended menu (from main menu)
5.1 RAPID INSTALLATION MENU
5.1 RAPID INSTALLATION MENU 5.1 RAPID INSTALLATION MENU 5.1 RAPID INSTALLATION MENU
IMPORTANT: The first time is essential to have IMPORTANT: The first time is essential to have IMPORTANT: The first time is essential to have IMPORTANT: The first time is essential to have the pump rating data the pump rating data the pump rating data the pump rating data
Parameter list of the Rapid Installation Menu Parameter list of the Rapid Installation Menu Parameter list of the Rapid Installation Menu Parameter list of the Rapid Installation Menu
Parameter Parameter Parameter Parameter
Read Read Read Read
(R) / (R) / (R) / (R) /
Write Write Write Write
(RW) (RW) (RW) (RW)
Unit Unit Unit Unit Min Min Min Min Max Max Max Max Default Default Default Default Description Description Description Description
Language Language selection
Nom MotorCurrent RW A 0.45
MMW07: 12
MMA07: 12
MMW12: 19
MMA12: 19
4.5
Set the nominal current of motor. See
data plate.
Nominal Value RW bar 0.3
MMW07: 7.5
MMA07: 10
MMW12: 7.5
MMA12: 10
2.5
Set the required system pressure (set
point)
Auto-Start RW ON OFF OFF
ON: AQUONTROLLER will start
automatically whenever power is
restored to power.
OFF: AQUONTROLLER not start
automatically each time power is
restored to power. In this case the
activation dell'AQUONTROLLER must be
done manually.
RAPID INSTALLATION MENU RAPID INSTALLATION MENU RAPID INSTALLATION MENU RAPID INSTALLATION MENU
You can view and edit the basic parameters of operation for quick and easy programming, such as: language,
motor rated current, pressure. Detail parameters see section 5.1.
MAINTENANCE MENU MAINTENANCE MENU MAINTENANCE MENU MAINTENANCE MENU
You can view and modify various functions in the rapid setup menu as additional parameters for quick and
complete calibration system. Detail parameters see section 5.2.
EXTENDED MENU (access with password) EXTENDED MENU (access with password) EXTENDED MENU (access with password) EXTENDED MENU (access with password)
You can view and edit all the operating parameters, including the rapid setup menu and maintenance menu.
It is necessary to access this menu, mainly in case of problems stopping the inverter and / or oscillation.
Detail parameters see section 5.3.