Xylem Aquontroller - Manual (Page 47)

en en en en
47
5.3 EXTENDED MENU 5.3 EXTENDED MENU 5.3 EXTENDED MENU 5.3 EXTENDED MENU
All parameters (inclusively parameters of the rapid installation and maintenance menu) can be viewed
during the operation.
To enter the Extended Menu + / - / ENTER must be pressed at the same time until “Extended Menu” is
displayed.
Extended
Menu…
For changing the parameters the password must be set by pressing + or –. Together with for fast
increase or together with ENTER for very fast increase.
Password
00066
Press
to display parameters and in ascending order. To display the parameters in descending order,
press together with ENTER ENTER ENTER ENTER.
To confirm changes of the parameter settings press ENTER. If password was wrong the error message
“???password=0…” will be displayed.
To exit the extended menu and to save all changes go to “Save & Exit” following the parameter 77. If the
Password provided by the technical assistance centre was used, all the edited parameters will be saved.
Save & Exit
with ENTER
Save & Exit
Done…..