YSI 5200 - Manual (Page 11)

YSI Incorporated 9 5200 Recirculating System Monitor
Section 3. Installation
Installation includes the following sections:
Ö Unpacking and Inspection
Ö Selecting an Installation Location
Ö Installing the Components
Ö Mount the YSI 5200 Recirculating System Monitor
Ö Installing the 5562 or 5561 Probe Assemblies
Ö Wiring the System
Ö Communications Method
Ö Grounding Information
Ö Safety Issues
Ö Lightning and Surge Protection
3.1 Unpacking and Inspection
Inspect the outside of the shipping carton for damage. If damage is detected, contact the carrier
immediately. Remove the instrument from the shipping container. Be careful not to discard any parts or
supplies. Confirm that all items on the packing list are present. Inspect all assemblies and components for
damage.
Save the original packing carton. Carriers typically require proof of damage due to mishandling. Also, if
it becomes necessary to return the monitor, you should pack the equipment in the same manner it was
received.
The following components are included with the purchase of the 5200 Monitor:
Ö 5200 Monitor
Ö 006515 Flange Mounting Kit
Ö 6506 Desiccant Kit
Ö 605226 Instruction Manual
Ö 605230 Compression Plugs, 2 each
Ö 605229 Compression Plugs, 2 each
Ö 655384 Dual Male RJ-45 Cable Assembly
Ö 655383 Adapter, DB-9 to RJ-45
Ö 655385 Inline Power Ferrite Assembly
Ö 655361 Ferrite Bead for Communication Port .390, .870, 1.272, 2 each
Ö 655365 Ferrite Bead for Relays, .500, 1.142, 1.280
Ö 605227UL 5579 (or 655478UL 5578) 12-Volt Power Supply
Ö 605223UL Pluggable Socket Connector for 12 VDC Power
Ö 605223UL Pluggable Socket Connector for RS-485, 4 Pole, with 120 Ω termination resistor
Ö 065944UL Pluggable Socket Connector for Relays, 12 Pole
Ö 065942UL Pluggable Socket Connector for Auxiliary Inputs, 3 Pole
If any parts are damaged or missing, contact your factory representative or YSI immediately.