YSI 600DW-B Sonde - Manual (Page 186)

EcoWatch for Windows Section 4
SAVE DATA DISPLAY
When opening a data file, you will probably want to look at the data in graph form. You may also want to
rearrange the default graph by selecting or reordering parameters, zooming in to a portion of the graph, or
even changing colors or changing fonts. You may sometimes choose to look at the data or a portion of it in
table form. All of this work is done in the Data Display window.
This command allows you to save the settings and content of the Data Display window so that you can load
it at another time and have it look exactly the same as when you saved it. This saved display is associated
with the data file. Up to 9 data displays can be saved per data file. When you save a display you will be
asked to give it a name in the following dialog box.
There must be an open data file for this command to be available. See also Load Data Display.
Shortcuts
Keys:
CTRL+S
LOAD DATA DISPLAY
This command is only available when a data file is open. If you have previously used the Save Data
Display command for the open data file, then you can load the saved display and have it look exactly the
same as when you saved it. Saved displays are associated with the data file. You can have as many as nine
saved displays for each data file. When loading a display you will be asked to choose from among the
names of saved displays.
YSI Incorporated Drinking Water Monitoring Systems Operation Manual 4-15