Xylem pHotoFlex/pHotoFlex Turb User Manual
Page 81
pHotoFlex / pHotoFlex Turb
Operation
81
ba75491d04
07/2006
Note
If a program is already stored under the selected number, the program-
ming procedure is canceled. To store the program under the selected
number, first erase the program stored under the number.
After successful transmission, the terminal program writes "!>".
If the transmission failed, the terminal program writes "!>".
Erasing user-defined
programs
To erase user-defined programs, enter a command line according to
the following scheme in the terminal program:
After successful transmission, the requested data is displayed on the
terminal.
If the transmission failed, the terminal program writes "!>".
Reading out user-
defined programs
To read out user-defined programs, enter a command line according to
the following scheme in the terminal program:
6
Finish the command line with Enter.
The data is transmitted to the pHotoFlex (Turb).
Erase all user-defined
programs
Erase one user-
defined program
Command line
U.520
U.521#1,Program No
Example
U.520
U.521#1,900
7
Enter the command line.
8
Finish the command line with Enter.
The data is transmitted to the pHotoFlex (Turb).
The requested data is displayed on the terminal as the result.
Read out all user-
defined programs
Read out one user-
defined program
Command line
U.510
U.511#1,Program No
Example
U.510
U.511#1,900
9
Enter the command line.