Xylem OxiTopIS OC100 - Manual (Page 65)

GLP / Tools GLP / Tools
64 BA31114e5 07/2006 BA31114e5 07/2006 65
Language
Select the language here in which the displays of the OxiTop ® Controller appear. The
controller has the following 5 languages stored in it (default German): German -
English - French - Italian - Spanish.
“Settings” menu:
Use
to select the “Language“
submenu.
The default language is
“German“.
To change this:
Press and
use to set the
language required and
again to confirm it.
From now on the displays appear
in the selected language.
Return to the “Settings“ menu:
, then .
“Settings“ menu.
Return to the main menu,
“GLP/Tools“:
, then
or
using .
Check
Main menu, “GLP/Tools“.
Use
to select the
“Check“ menu.
Show
“Check“ menu.
“Show
“ preselected.
“Show “ submenu.
Use to select between
“Show free “ and
“Show all “.
Point the controller at the measuring
heads: 40 cm to 100 cm
All the measuring heads that are addressed flash for 5 seconds.