Xylem OxiTopIS OC100 - Manual (Page 72)

GLP / Tools GLP / Tools
72 BA31114e5 07/2006 BA31114e5 07/2006 73
(Exceeding the time causes a
return to the “Check“ menu).
The controller display shows the
result of the pneumatic test.
Use to return to the
“Check“ menu.
Maintenance
Main menu, “GLP/Tools“.
Use
to select “Maintenance“ menu.
Erase finished samples
Here you can erase the data of finished samples that is already evaluated or no
longer required in order to free memory in the controller.
Menu item “Erase samples“ is
preset.
A submenu appears with the
selection:
- From sample no. (preselected)
- All
- Back (from the “Maintenance”
submenu)
The controller displays the list of
finished samples.
The oldest finished sample is
marked.
With , you can mark further
samples.
With , you can remove the
marking again.
The controller asks again if you
really want to erase the marked
samples from the memory.
After confirmation, the display
message shown here appears for
2 seconds and then the controller
returns to the menu “Erase
finished samples“.