Extron Electronics MLS 608 D Series User Guide - Manual (Page 36)

f
Filter (FILT) — Up to nine frequency filters can be inserted in any combination of high
pass, low pass, tone (bass and treble shelving), or parametric.
g
Dynamics (DYN) — A single dynamics processor can be inserted from a choice of
AGC, compressor, limiter, or noise gate.
h
Volume (VOL) — Left and right faders adjust stereo output volume from -100 to
0 dB and includes a mute control. A polarity switch (+/-) is provided and a meter displaying
output audio level in dBFS (decibels relative to full scale).
Mic Input processor blocks
3 2 1 6 5 4 7 8
Mic/Line input signal chain elements shown above, from left to right, are as follows:
a
Mic/line input gain,
b
Filter,
c
Feedback supressor,
d
Dynamics,
e
Dynamics,
f
Delay,
g
Ducking,
h
Pre-mixer gain
a
Mic/Line Input Gain (GAIN) — Mic/Line input
gain control provides a gain range of -18 dB to +80 dB.
Adjustments are made using the slider or entering the
target dB level into the dB field (see image at right).
b
Filter (FILT) — Up to five frequency filters can be
inserted in any combination of high pass, low pass, tone
(bass and treble shelving), or parametric.
c
Feedback Suppressor (FBS) — Provides 15 dynamic
filters and 5 fixed filters for effective feedback control
(primarily of microphone inputs).
d
Dynamics (DYN) — A single dynamics processor can
be inserted from a choice of AGC, compressor, limiter, or
noise gate.
e
Dynamics (DYN) — A single dynamics processor can be inserted from a choice of
AGC, compressor, limiter, or noise gate.
f
Delay (DLY) — Channel delay can be set by feet or meters modified by an air
temperature parameter, or by direct time insertion from 0 - 200 ms.
g
Ducking (DUCK) — Mic ducking can be set up using the ducking dialog box.
This lowers the level of microphones and program material (based on a source signal
from another microphone) for the duration of the signal that is present at the source
microphone.
h
Pre-Mixer Gain (GAIN) — Pre-mixer matrix gain control with a range of
-100 to +0 dB.
Fader handle
Signal level
readout
MLS 608 D Series • Operation 30