Extron Electronics MLS 608 D Series User Guide - Manual (Page 59)

z Configure EDID — Selecting this option opens a window that allows adjustments
to be made to the EDID settings for analog inputs 1 through 3 and digital inputs 5
through 8. The EDID information provided at the analog or digital output can be
stored to a selectable location. Any changes are made directly on the inputs. The EDID
configuration option is available only in Live mode.
z Connect to (or Disconnect from) Device — Selecting this option allows the user to
connect to or, if already connected in Live mode, disconnect, from the
MLS 608 D unit. The menu name is displayed as appropriate to the current connection
status. <F6> is the shortcut key.
When selecting to connect to a device, a window appears with two connection
method tabs (RS-232 or USB). Select a tab and complete the fields on the tab as
appropriate.
After initial connection a Synchronize with Device dailog box appears. Select Pull
(download, default setting) or Push (upload) as appropriate. The Push selection also
has a configurable Advanced option dialog box.
For complete details of the Synchronize with Device option, see the DSP Configurator
Help File.
If the device is already connected, the Connect to Device option on the Tools
menu is replaced by the Disconnect from Device option.
MLS 608 D Series • DSP Configurator 53