Extron Electronics MLS 608 D Series User Guide User Manual
Page 82
Command
ASCII Command
(host to switcher)
Response
(switcher to host)
Additional
Description
Reset (Zap)/Erase Commands
Reset all video and
audio settings to
factory default
E
ZXXX}
Zpx]
Resets all video and audio
settings.
Reset all settings to
factory default
E
ZQQQ}
Zpq]
Resets all video and
audio settings, protected,
configuration, verbose mode,
and control port settings.
NOTE:
This command is the same as reset mode 5.
Delete all presets and
names
E
ZG}
Zpg]
Removes all presets and preset
names.
Delete individual
preset
EX1@
ZG}
ZpgX1@]
Removes a selected preset.
Bidirectional Serial Port Commands
Configure
parameters
24
E
1*X4$,X4%,X4^,X4& CP}
Cpn01X4$,X4%,X4^,X4&]
Set baud rate X4$, parity
X4%, data bits X4^, and
stop bits X4&.
View parameters
E
1CP}
X4$
,X4%,X4^,X4&]
View baud rate X4$,
parity X4%, data bits X4^,
and stop bits X4&.
Verbose settings
Set verbose mode
EX4*
CV}
VrbX4*]
Set verbose mode
parameters.
View parameters
E
CV}
X4*]
View verbose mode
parameters.
Unit name
Set unit name
EX5@
CN}
Ipn•X5@]
Set unit name.
Set unit name to
default
E•
CN}
Ipn•X5#]
Set unit name to default
View unit name
E
CN}
X5@]
View unit name
NOTE:
X1@ = Preset number: 1-8
X4$ = Baud rate: 300, 600, 1200, 1800, 2400, 3600, 4800, 7200, 9600, 28800, 38400 (default), 57600, 115200
X4% = Parity, Odd, Even, None (default), Mark, Space (only use first letter, for example N = None)
X4^ = Data bits: 7, 8 (default = 8)
X4& = Stop bits: 1, 2 (default = 1)
X4* = Verbose mode: 0 = no verbose mode and non-tagged responses for queries, 1 = verbose mode and non-tagged
responses for queries (default), 2 = no verbose and tagged responses for queries, 3 = verbose mode and tagged
responses for queries
X5@ = Alpha numeric up to 24 characters. No special characters except hyphen (-). No lower or upper case distinction,
no blanks or spaces. First character must be alpha, last cannot be hyphen.
X5# = Alpha numeric name. Combination of unit name and last three pairs of unique alpha-numeric characters,
(for example MLS-608-D-MA-06-DE-2E).
MLS 608 D Series • SIS Programming and Control
76