Controlling the mls 608 d series switcher – Extron Electronics MLS 608 D Series User Guide User Manual
Page 9
z
Essential audio DSP tools — ProDSP provides an extensive array of easy-to-use,
digital audio processing tools for audio system setup and fine-tuning, including audio
gain, dynamics, compression, filtering, delay, microphone ducking, loudness, and
feedback suppression.
z
DSP Configurator
™
Software — A powerful yet user-friendly software tool for
managing all audio setup and operations of the MLS 608 D SA, it enables complete
setup and configuration of digital audio processing tools on the ProDSP platform as
well as microphone mixing.
z
Front panel USB configuration port — Provides convenient access for system setup
and configuration, as well as ProDSP for audio system integration.
z
Plenum rated MTP/HDMI U R receiver — meets UL 2043 for heat and smoke
release, excluding power supply
z
Rack-mountable 2U, full rack width metal enclosure
z
Internal universal power supply — The 100-240 VAC, 50-60 Hz, international
power supply provides worldwide power compatibility.
Controlling the MLS 608 D Series Switcher
All MLS 608 D series switchers can be controlled using one or more of the following
methods:
z
The front panel controls.
z
A computer, a TouchLink touchscreen panel, or MediaLink Controller connected to the
RS-232 port. These allow creation of a simple and intuitive user interface for the
MLS 608 D Switchers, and the entire room.
z
The Extron Simple Instruction Set (SIS
™
): a set of simple keystroke commands that can
be used to control the devices via a computer or similar control device connected to
the RS-232 port
z
DSP Configurator control software, running from a connected computer, and used for
managing all audio setup and operations of the MLS 608 D Series unit. This enables
complete setup and configuration of digital audio processing tools on the ProDSP
platform as well as microphone mixing.
MLS 608 D Series • Introduction
3