Extron Electronics MLS 608 D Series User Guide - Manual (Page 77)

Command ASCII Command
(host to switcher)
Response
(switcher to host)
Additional
Description
Output Bass Adjustment (Group Master 3)
Set gain (dB) E D3*X2)GRPM} GrpmD 03 *X2)] Set the gain value X2)
for group master 3.
Example: ED3*24 0 GRPM} GrpmD 03 *+ 00240 ] Sets the gain value to
+24 dB.
Example: ED3* 0 GRPM} GrpmD 03 *+ 00000 ] Sets the gain value to
0 dB.
Example: ED3*-1 00 GRPM} GrpmD 03 *- 00100 ] Sets the gain value to
-10 dB.
Increment gain E D3*X&+GRPM} GrpmD 03 *X2)] Increase the gain value
X2) by X&.
Decrement gain E D3*X&-GRPM} GrpmD 0 3*X2)] Decrease the gain value
X2) by X&.
View master value E D3GRPM} X2)] View master bass output
value X2).
Output Treble Adjustment (Group Master 4)
Set gain (dB) E D4*X2)GRPM} GrpmD 04 *X2)] Set the gain value X2)
for group master 4.
Example: ED4*24 0 GRPM} GrpmD 04 *+ 00240 ] Sets the gain value to
+24 dB.
Example: ED4* 0 GRPM} GrpmD 04 *+ 00000 ] Sets the gain value to
0 dB.
Example: ED4*-1 00 GRPM} GrpmD 04 *- 00100 ] Sets the gain value to
-10 dB.
Increment gain E D4*X&+GRPM} GrpmD 04 *X2)] Increase the gain value
X2) by X&.
Decrement gain E D4*X&-GRPM} GrpmD 04 *X2)] Decrease the gain value
X2) by X&.
View master value E D4GRPM} X2)] View master treble
output value X2).
Overall Output Volume Mute Setting (Group Master 5)
NOTE:
This command mutes the program and mic audio. It does not mute the embedded audio on the HDMI output signal.
Set volume mute E D5*X4(GRPM} GrpmD 05 *X4(] Set the volume mute X4(
for group master 5.
View master value E D5GRPM} X5)] View master volume
mute value X5).
Audio Input Format
NOTE:
For audio inputs 5-8.
Selects between analog (5-pole captive screw) or digital (embedded in HDMI input).
Set format E DX1)*X1!AU} DsDX1)*X1!] Sets audio input X1) to
format X1!.
View format E DX1)AU} X1!] View audio format X1!
for input X1).
NOTE: X& = Increment and decrement dB values: in 0.1 dB steps (multiply by 10, for example 10 = 1.0 dB).
X1) = Inputs 5-8: 5 = 30008, 6 = 30010, 7 = 30012, 8 = 30014
X1! = Audio format: 0 = analog, 1 = digital (default setting)
X2) = Output bass/treble master value: 240 to -240, default 0, decibel value multiplied by 10.
For example 230 = +23 dB, -210 = -21 dB.
X4( = Mute status: 0 = mute off, 1 = mute on (default)
X5) = Mute value: +00000 = off, +00001 = on (default)
MLS 608 D Series • SIS Programming and Control 71