Extron Electronics MLS 608 D Series User Guide User Manual
Page 42
Configuring Groups
For an MLS 608 D Series device, five group masters are pre-configured and relate to
program volume, mic volume, output bass, output treble, and volume mute. These groups
cannot be deleted; however, group membership can be modified.
To modify a pre-configured group:
1.
From the Tools menu, select Configure Groups. The Configure Groups dialog
box opens.
- or -
From the View menu, select Group Controls and click Add a Group in the
Group Controls dialog box. The Configure Groups dialog box opens.
- or -
From the View menu, select Group Controls to open the Group Controls dialog
box. Then, double-click one of the displayed group controls to open the Configure
Group dialog box. The Configure Group dialog box opens to the selected group
master, expanding the associated control type tree to show the group members.
2.
From the Select Group drop-down list, select one of the pre-configured groups.
The tree in the Select Control Type section expands based on the selected group. In
the Available Group Members section, the group members with a selected check box
are associated with the selected group master. Available members that are controlled
by an existing group master are indicated with blue text.
3.
Modify the group membership as desired by selecting or clearing the group member
check boxes.
4.
Click Apply.
To add and configure a group:
1.
From the Tools menu, select Configure Groups. Alternatively, from the View
menu, select Group Controls and click Add a Group in the Group Controls
dialog box. The Configure Groups dialog box opens.
2.
The Select Group drop-down list defaults to the first empty group. Select an
empty group if necessary, or select an existing group to overwrite.
3.
In the Select Control Type section, expand the tree for the type of control (gain or
mute) you want to group. To expand the tree, click the sign beside the control type.
4.
Select the desired gain or mute control type (such as Input Gain beneath the gain
control). The Available Group Members section populates with all possible members
for the selected control type. Available members that are controlled by an existing
group master are indicated with a blue font.
In the Available Group Members section, select the desired group members by
selecting the associated check boxes. When a sign exists, click the associated check
box to select the entire tree. Alternatively, you can select individual members within
the tree. To do so, click the sign to expand the tree and select the check boxes for
individual members.
5.
Click Apply. To configure additional groups, repeat steps 2 through 5
MLS 608 D Series • Operation
36