Extron Electronics MLS 608 D Series User Guide - Manual (Page 95)

Video — MTP/HDMI U R
MTP input
Gain ........................................ Unity
Maximum resolution
Analog ............................... Up to 2048x1080 or 1080p at 60 Hz
Signal transmission distance, analog
See the "Video — MLS analog inputs" section of these specifications
HDMI digital input
Maximum data rate ................. 4.95 Gbps (1.65 Gbps per color)
Maximum pixel clock ............... 165 MHz
Maximum resolution
Digital ................................ Up to 1920x1200 or 1080p at 60 Hz
Signal transmission distance, digital
See the "Video output — MLS" section of these specifications
NOTE: The transmission distance varies greatly depending on the signal resolution and on the type of cable,
graphics card, and display used in the system.
Formats ................................... RGB and YCbCr digital video
Standards ................................ DVI 1.0, HDMI 1.2
Video input — MTP/HDMI U R
Number/signal type
Analog inputs .......................... 1 set of proprietary analog signals
HDMI digital input ................... 1 set of proprietary digital signals
Connectors
MTP input ................................ 1 female RJ-45
HDMI digital input ................... 2 female RJ-45
Video output — MTP/HDMI U R
Number/signal type
Analog output ......................... 1 RGBHV, RGBS, component video (bi-level and tri-level), S-video, composite video
(follows input type)
HDMI digital output ................. 1 single link HDMI (or DVI-D*)
Connectors
Analog output ......................... 1 female 15-pin HD for RGB
3 female BNC for Y, R-Y, B-Y
1 female 4-pin mini DIN for S-video (Y/C)
1 female BNC for composite video
HDMI digital output ................. 1 female HDMI type A
Nominal levels ................................ Analog outputs:
1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
Minimum/maximum level ............... Analog outputs: 0.8 V to 1.2 Vp-p
Impedance ..................................... Analog outputs: 75 ohms (during video output only)
Return loss ..................................... Analog outputs: <-30 dB @ 5 MHz (during video output only)
DC offset ....................................... Analog outputs: <±20 mV with input at 0 offset
Sync — analog outputs — MTP/HDMI U R
Output type ................................... RGBHV, RGBS, Component video (bi- or tri-level)
Standards ....................................... NTSC 3.58, NTSC 4.43, PAL, SECAM
Output level ................................... 4.0 V to 5.0 Vp-p, unterminated
Output impedance ......................... 87 ohms (24 mA)
Polarity ........................................... Positive or negative (selectable)
MLS 608 D Series • Reference Material 89