Extron Electronics MLS 608 D Series User Guide - Manual (Page 79)

Command ASCII Command
(host to switcher)
Response
(switcher to host)
Additional
Description
Input Skew Adjustment
Set input skew
values EX1& *X1&*X1&ISEQ} IseqX1&*X1&*X1&] Set input skew values X1&
for R, G, and B signals
(IseqR*G*B).
Increment one input
skew value EX1* +ISEQ} IseqX1&*X1&*X1&] Increase the skew value
of X1* by 1.
Decrement one
input skew value EX1* -ISEQ} IseqX1&*X1&*X1&] Decrease the skew value
of X1* by 1.
View current values E ISEQ} X1& *X1&*X1&] View skew values.
Output Skew Adjustment
Set output skew
values EX1& *X1&*X1&OSEQ} OseqX1&*X1&*X1&] Set output skew values
X1& for R, G, and B
signals (OseqR*G*B).
Increment one
output skew value EX1* +OSEQ} OseqX1&*X1&*X1&] Increase the skew value
of X1* by 1.
Decrement one
output skew value EX1* -OSEQ} OseqX1&*X1&*X1&] Decrease the skew value
of X1* by 1.
View current values E OSEQ} X1& *X1&*X1&] View skew values.
Recall Presets
Recall preset X1@ . RprX1@] Recall preset X1@ .
View Preset Ties
View preset video
tie EX1@ *1*1VC} X!• Vid] View the video input X!
tied as a preset.
View preset audio
tie EX1@ *1*2VC} X!• Aud] View the audio input X!
tied as a preset.
Naming Presets
Write preset name EX1@ ,nameNG} NmgX1@,name] Name preset X1@.
Read preset name EX1@ NG} name] View name X1@.
NOTE: • If preset is unassigned, name displays [unassigned].
• If preset is saved but not yet named, default is “Preset X1@”(where X1@ is the preset number).
• If user tries to name when preset is unassigned, unit responds with E11.
• If user tries to recall an unsaved preset, unit responds with E11.
• Invalid characters: ~ , @ = ‘ [ ] { } < > ” ; :| \ and ?.
Naming Inputs and Outputs
Write input name EX1$ ,nameNI} NmiX1$,name] Name input X1$.
Read input name EX1$ NI} name] View input X1$ name.
Write output name EX1% ,nameNO} NmoX1%,name] Name output X1%.
Read output name EX1% NO} name] View output X1% name.
NOTE: X! = Input selection: 0-8, 0 = no connection
X1@ = Preset number: 1-8
X1$ = Inputs 1-8: 1-8 = program audio inputs, 9 = Mic 1 audio input, 10 = Mic 2 audio input
X1% = Output number: 1-4
X1& = Skew adjustment value: 0-31, in 2 ns increments (for example 31 = 62 ns)
X1* = Video plane: 0 = red, 1 = green, 2 = blue
MLS 608 D Series • SIS Programming and Control 73