B&K Precision 2552-2559 - Programming Manual - Manual (Page 101)

101
DESCRIPTION The STORE command stores the contents of the
specified trace into one of the internal memories
M1 to M10(or M20 in the CFL series) or to the
current directory in a USB memory device.
COMMAND SYNTAX
STOre [<trace>, <dest>]
<trace>: = {TA, TB, TC, TD, C1, C2, C3,
C4,ALL_DISPLAYED}
<dest>: ={M1~M10(or M20 in the CFL
series),UDSK}
Note: If the STORE command is sent without any
argument, and the current trace isn’t
enabled, the current trace will be enabled
and stored in the Store Setup. This setup
can be modified using the STORE_SETUP
command.
EXAMPLE
The following command stores the contents of
Channel 1(C1) into Memory 1 (M1):
Command message:
STO C1, M1
The following command stores all currently
displayed waveforms onto the USB memory
device:
Command message:
STO ALL_DISPLAYED, UDSK
RELATED COMMANDS STORE_SETUP, RECALL
WAVEFORM TRANSFER STORE, STO
Command