B&K Precision 2552-2559 - Programming Manual - Manual (Page 120)

120
DESCRIPTION The TRIG_SLOPE command sets the trigger
slope of the specified trigger source.
The TRIG_SLOPE? query returns the trigger
slope of the selected source.
COMMAND SYNTAX <trig_source>: TRig_SLope <trig_slope>
<trig_source>: = {C1, C2, C3, C4, EX,EX5，
LINE}
<trig_slope>: = {NEG, POS, WINDOW}
QUERY SYNTAX <trig_source> : TRig_Slope?
RESPONSE FORMAT <trig_source>: TRig_SLope <trig_slope>
EXAMPLE
The following sets the trigger slope of Channel 2
to negative:
Command message:
C2: TRSL NEG
RELATED COMMANDS
TRIG_COUPLING, TRIG_DELAY,
TRIG_LEVEL, TRIG_MODE, TRIG_SELECT,
TRIG_SLOPE
ACQUISITION TRIG_SLOPE, TRSL
Command /Query