B&K Precision 2552-2559 - Programming Manual - Manual (Page 29)

29
<cursor> :={ HREF, HDIF, VREF, VDIF,
TREF, TDIF}
RESPONSE FORMAT <trace>:CuRsor_SeT <cursor>, <position> [,
<cursor>, <position>, <cursor>, <position>]
EXAMPLE The following command positions the VREF
and VDIF cursors at +3 DIV and −1 DIV
respectively, using C1 as a reference:
Command message:
C1: CRST VREF, 3DIV, VDIF, −1DIV
RELATED COMMANDS CURSOR_MEASURE, CURSOR_VALUE,
PARAMETER_VALUE