B&K Precision 2552-2559 - Programming Manual - Manual (Page 47)

47
DESCRIPTION The FILENAME command is used to change the
default filename given to any traces, setups and
hard copies when they are being stored to a mass
storage device.
COMMAND SYNTAX
FiLeNaMe TYPE, <type>, FILE, ‘<filename>’
<type>:={ C1,C2,C3, C4, SETUP,TA, TB, TC,
TD, HCOPY}
<filename> : = an alphanumeric string of up to 8
characters forming a legal DOS filename.
Note: the file’s extension can be specified automatically by the oscilloscope.
QUERY SYNTAX
FiLeNaMe? TYPE, <type>
<type> :={ ALL, C1, C2, C3, C4, SETUP, TA,
TB, TC, TD, HCOPY}
RESPONSE FORMAT
FiLeNaMe TYPE, <type>, FILE, “<filename>”
[,TYPE, <type>, FILE, “<filename>”...]
EXAMPLE The following command designates channel 1
waveform files to be “TESTWF.DAV”:
Command message:
FLNM TYPE, C1, FILE, ‘TESTWF’
RELATED COMMANDS DIRECTORY, DELETE_FILE
MASS STORAGE FILENAME, FLNM
Command /Query