B&K Precision 2552-2559 - Programming Manual - Manual (Page 16)

16
DESCRIPTION The AUTO_TYPESET command selects the
specified type of automatically adjusting which is
used to display.
COMMAND SYNTAX
AUTO_TYPESET <type>
<type> : = {SP,MP,RS,DRP,RC}
SP means only one period to be displayed, MP means
multiple periods to be displayed, RS means the
waveform is triggered on the rise side, DRP means
the waveform is triggered on the drop side, and RC
means to go back to the state before auto set.
QUERY SYNTAX
AUTO_TYPESET?
RESPONSE FORMAT
AUTO_TYPESET <type>
EXAMPLE The following command sets the type of automatic
adjustment to multiple periods:
Command message:
AUTTS MP
RELATED COMMANDS ASET
ACQUISITION AUTO_TYPESET, AUTTS
Command /Query