B&K Precision 2552-2559 - Programming Manual - Manual (Page 102)

102
DESCRIPTION The STORE_PANEL command stores the
complete front-panel setup of the instrument, at
the time the command is issued, into a file on
the specified-DOS path directory in a USB
memory device.
COMMAND SYNTAX
STore_PaNel DISK, <device>, FILE,
‘<filename>’
<device>：={UDSK}
< directory >：=A legal DOS path or filename.
A filename -string of up to 8 characters, with the
extension “.SET”. (This can include the ‘/’
character to define the root directory.)
EXAMPLE The following code saves the current instrument
setup to root directory of the USB memory
device in a file called “SEAN.SET”:
Command message:
STore_PaNel DISK,UDSK,FILE,'SEAN.SET'
The following code saves the current instrument
setup to specified-directory of the USB memory
device in a file called “SEAN.SET”:
Command message:
STore_PaNel DISK,UDSK,FILE,'/AAA/SEAN'
RELATED COMMANDS *SAV, RECALL_PANEL, *RCL
SAVE/RECALL SETUP STORE_PANEL, STPN
Command