B&K Precision 2552-2559 - Programming Manual - Manual (Page 37)

37
DESCRIPTION The DEFINE command specifies the mathematical
expression to be evaluated by a function.
COMMAND SYNTAX DEFine EQN,’<equation>’
<equation> the mathematical expression
Function Equations
<source1> + <source2> Addition
<source1> - <source2> Subtraction
<source1>*<source2> Multiplication
<source1>/<source2> Ratio
FFT(source x) FFT
QUERY SYNTAX DEFine?
RESPONSE FORMAT DEFine EQN,'<equation>'
EXAMPLE
Command message:
DEFine EQN,'C1*C2'
FUNCTION DEFINE, DEF
Command /Query