B&K Precision 2552-2559 - Programming Manual - Manual (Page 25)

25
DESCRIPTION The COMM_NET command changes the IP
address of the oscilloscope’s internal network
interface.
The COMM_NET? query returns the IP address
of the oscilloscope’s internal network interface
.
COMMAND SYNTAX COMM_NET <ip_add0>, <ip_add1>,
<ip_add2>, <ip_add3>
< ip_add >:= 0 to 255
QUERY SYNTAX
COMM_NET?
RESPONSE FORMAT COMM_NET <ip_add0>, <ip_add1>,
<ip_add2>, <ip_add3>
EXAMPLE This instruction will change the IP address to
10.11.0.230:
Command message:
CONET 10,11,0,230
MISCELLANEOUS COMM_NET, CONET
Command /Query