B&K Precision 2552-2559 - Programming Manual - Manual (Page 91)

91
DESCRIPTION The RECALL_PANEL command recalls a
front-panel setup from the current directory on
mass storage.
COMMAND SYNTAX
ReCall_PaNel DISK, <device>, FILE,
‘<filename>’
<device> : = {UDSK}
<filename>：= A waveform file under a legal
DOS path . A filename-string of up to eight
characters, with the extension “.SET”. (This
can include the ‘/’ character to define the root
directory.)
EXAMPLE The following recalls the front-panel setup from
file SEAN. SET in a USB memory device:
Command message:
RCPN DISK, UDSK, FILE,‘SEAN. SET’
RELATED COMMANDS PANEL_SETUP, *SAV, STORE_PANEL,
*RCL
SAVE/RECALL SETUP RECALL_PANEL, RCPN
Command