B&K Precision 2552-2559 - Programming Manual - Manual (Page 27)

27
DESCRIPTION The CURSOR_MEASURE command
specifies the type of cursor or parameter
measurement to be displayed
The CURSOR_MEASURE? query indicates
which cursors or parameter measurements are
currently displayed.
Notation
HREL Selected tract-cursor mode
VREL Selected manual-cursor mode and set to voltage type
AUTO Selected auto mode
OFF Cursors and parameters off
COMMAND SYNTAX
CuRsor_MeaSure <mode>
<mode>={ OFF,HREL,VREL,AUTO}
QUERY SYNTAX
CuRsor_MeaSure?
RESPONSE FORMAT CuRsor_MeaSure <mode>
EXAMPLE The following command determines cursor
function is turned off:
Command message:
CRMS OFF
RELATED COMMANDS CURSOR_VALUE, PARAMETER_VALUE
CURSOR CURSOR_MEASURE, CRMS
Command /Query